2/2
D 100
Safety instructions for product removal
GB 01739 - Edition 14 - Sept 10
Decontamination – product dismantling
According to the regulations 2002/96/CE about Waste of electrical and
electronical equipments, and 2002/95/CE about Restriction of Hazardous
substances, the manufacturer provides a recycling paid service for the end-
of-life of waste electrical and electronic equipment.
Any obligation of the manufacturer to take back such equipment shall
apply only to complete not amended or modified equipment, using adixen
Vacuum Products original spare parts, delivered by adixen Vacuum Products,
containing i.e. all its components and sub-assemblies.
This obligation will not cover the shipping cost to an adixen Vacuum Products
service center.
Before returning the product, fill in the safety form, attach it to the product
before shipping to the service-repair office closest to you.
How to contact us ?
The overhaul must be performed by manufacturer’s trained personnel.
Contact nearest service center or the service support at the following e-mail
address:
The outside of the product and control box can be cleaned with a lint free
wiper. Avoid using cleaning products that deteriorate printed surfaces and
self adhesive labels. All other cleaning operations must be done by our
service centers.
Wear gloves, protective glasses, any appropriated safety equipment.
Ventilate the premises well.
Do not eliminate maintenance waste via standard disposal channels. Have it
destroyed by a qualified company if necessary.
Install the inlet and exhaust blanking plates, thus delivered with the pump or
available as accessories (
E100) .
Users are advised:
adixen Vacuum Products - Operating instructions - ATH 500 M-MT
adixen Vacuum Products - Operating instructions - ATH 500 M-MT
