2/2
B 340
Water cooling connection
GB 03369 - Edition 03 - May 2011
Water leak risk : maintain the water valve inlet fitting with a flat wrench
during the water line connection (pipe equipped with connector), this to
avoid fitting damage.
Do no install water fittings above electrical components : there is a risk of
electrical discharge in case of a leak at the water fitting connection.
Water cooling
connections
MT model
- Provide a water inlet pipe and
a tap to adjust the flow rate.
- Connect the cooling circuit
(tube 1/4’) on the provided
fittings in accordance with the
flow direction (inlet water on
the valve).
Water in
Water out
Water valve supply
adixen Vacuum Products - Operating instructions - ATH 500 M-MT
adixen Vacuum Products - Operating instructions - ATH 500 M-MT
