GB 04638 - Edition 01 - Jan. 2012
1/1
B 350
Air cooling connection
When the pump is supplied with an air cooling unit, this one is
equipped with a power cable.
Fan supply cable
5m length / free wire
(1 or blue - / 2 or brown +)
Fan supply 48 VDC |1-
|2+
|3 NC
Fan
The air cooling kit can be
separately ordered. The
installation is the customer’s
responsability.
The power supply fan requires a 48 VDC external power supply,
supplied by the customer. The accessory suggested by the
manufacturer (
A510
) is used to power the pump and the fan.
Perform wiring of the fan in accordance with the marks of the
terminals and son (see diagram above) (
B400
) .
Fan electrical connection
Instructions to disconnect
the fan
The power supply should never be switched off as long as the rotor is
moving.
Switch off the power supply, before disconnecting the power supply from
the ATH 500 M-MT.
Fan installation on the
pump
adixen Vacuum Products - Operating instructions - ATH 500 M-MT
adixen Vacuum Products - Operating instructions - ATH 500 M-MT
