6/6
B 100
Safety instructions for pump and
controller installation
GB 03365 - Edition 02 - Jan 12
This label indicates that handling the pump can cause muscle strain or back
injury.
For all product handling, use the appropriate handling devices.
This label warns the user against possible risk of injury due to any hand
contact with hot surfaces.
It states that protective gloves should be used before performing any
intervention.
Labels stuck
on the product
This label indicates that some of the internal parts are energized and could
cause electrical shocks in case of contact. It advises to disconnect the pump
before any intervention or to properly lock-out and tag-out the equipment
breaker before any intervention on the pump.
Other labels
Customer is in charge to stick these labels on the ATHM on the most
appropriate location to warn the operator regarding the probable
hazards.
This label informs the user that moving parts present inside the pump
coud cause personal injury, like crushing
or cutting. The user must keep all body parts away from moving
parts.
MOVING PARTS PRESENT
Moving parts can crush and cut.
Keep hands or feet away from moving parts.
WARNING
The «hot surface» sticker must be sticked conspicuously on the pump
housing.
The user must label visibly the product to warn against pumped
process gas that could be dangerous and toxic and could cause
severe injuries or death. It precises that any preventive maintenance
operation can only be performed by trained personnel.
FLAMMABLE, CORROSIVE AND TOXIC
CHEMICALS LOCATED WHITHIN THE ENCLOSURE
Explosure may result in severe injury
or death.
Preventive maintenance must be done
by trained personnel only.
WARNING
Avoid causing a shock on a pump when the rotor is moving, it can block the
right operation.
adixen Vacuum Products - Operating instructions - ATH 500 M-MT
adixen Vacuum Products - Operating instructions - ATH 500 M-MT
