15
Safety and Regulatory Information
• Tempe5 °C to +40 °C (+41 °F to +104 °F).
• Relative humidity 20% to 80%, without condensation.
• Altitude in the range -400 m to 2,000 m (-1,312 ft. to 6,562 ft).
Storage conditions:
• Ambient temperature –20 °C to +60 °C (–4 °F to +140 °F).
• Relative humidity 20% to 80%, without condensation.
• Altitude in the range -400 m to 12,000 m (-1,312 to 39,370 feet).
• Altitude in the range 0 m to 12,000 m (sea level to 39,370 feet).
When you remove the instrument from storage, before unpacking or putting it into
operation, allow it to stand for at least a day under the approved operating
conditions.
Symbols Used on the Instrument
The three different types of warning symbols that appear on the instrument are
shown below:
Warning
This symbol indicates Caution, risk of electric shock.
AVERTISSEMENT: Risque de choc électrique.
Warning
This symbol indicates Caution, risk of danger.
Documentation must be consulted to determine the nature of the
potential hazard and any actions which have to be taken.
AVERTISSEMENT: Risque de Danger: Réfère à la documentation
de déterminer la nature de l’hasard potentiel et aucunes actions qui
sont nécessaire de le réparer.
!
Warning
Summary of Contents for AVIO 500
