Parker P Series, User Manual, Page: 242 / 316

Parker Hannifin
P Series User Guide 240
0x230B Program Jog Operation Time 4 ALL
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
UINT 0 to 10000 5000 ms RW No
At all
times
Yes
Please see descriptions on speed 1(0x2304).
0x230C Index Pulse Search Speed ALL
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
INT -1000 to 1000 20 rpm RW No Servo Off Yes
Set the index pulse search speed.
0x230D Speed Limit Function Select ALL
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
UINT 0 to 3 0 - RW No Servo Off Yes
Set the speed limit function for torque control.
Set Value Setting Details
0 Limited to the limit speed value (0x230E)
1 Limited to the motor’s maximum speed
0x230E Speed Limit Value at Torque Control Mode ALL
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
UINT 0 to 6000 1000 rpm RW Yes
At all
times
Yes
Set the limit speed value for torque control. It only applies when the speed limit function
setting (0x230D) is set to 0.
0x230F Over Speed Detection Level ALL
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
UINT 0 to 10000 6000 rpm RW No
At all
times
Yes
Sets the detection level for the excessive speed alarm (AL-50).When the set value is
higher than the motor’s maximum speed, the detection level is determined by the
motor’s maximum speed
www.comoso.com