Parker EME
Compax3 device description
192-120101 N11 C3I11T11 November 2007
43
3.5
Connections of Compax3H
In this chapter you can read about:
Compax3H plugs/connections ...........................................................................................................43
Terminal clamps – max. line cross section C3H................................................................................45
Plug and pin assignment C3H ...........................................................................................................46
Motor / Motor brake C3H ...................................................................................................................48
Control voltage 24 VDC C3H .............................................................................................................49
Mains connection Compax3H ............................................................................................................50
Braking resistor / supply voltage C3H................................................................................................51
3.5.1.
Compax3H plugs/connections
The following figure is an example for all sizes.
The fitting of the different controller plugs depends on the extension level of
Compax3.
3
5
4
1
2
(1): Dummy cover with display of the
external
device
status LEDs.
(2): lower clamp cover, fixed by 2 screws at the device
bottom.
(3): RS232 programming interface
Connection to the PC via adapter cable SSK32/20
(furnished with the device) and standard RS232 cable
SSK1.
(4): Controlling
(5): Power connections
