Parker EME
Technical data
192-120101 N11 C3I11T11 November 2007
303
Special encoder systems for
direct drives
Option F12
Analog hall sensors
Sine - cosine signal (max.
5Vss
; typical 1Vss)
90° offset
U-V Signal (max.
5Vss
; typical 1Vss) 120°
offset.
Encoder
(linear or rotatory)
Sine-cosine (max.
5Vss
400kHz) or
TTL (RS422) (max. 5MHz)
with the following modes of commutation:
automatic commutation
(see page 251) or
Digital hall sensors (e.g. DiCoder
©
)
Digital, bidirectional interface
All EnDat 2.1 or EnDat 2.2 feedback systems
with incremental track (sine-cosine track)
linear or rotary
max. 400kHz Sine-Cosine
Distance coded feedback
systems
Distance coding with 1VSS - Interface
Distance coding with RS422 - Interface
(Encoder)
Feedback error compensation
Feedback error compensation
Automatic feedback error compensation (offset &
amplification) for analog hall sensors and sine-
cosine encoder can be activated in the
MotorManager.
Motor holding brake output
Motor holding brake output
Compax3
Voltage range
21 – 27VDC
Maximum output current (short circuit
proof)
1.6A
Minimum output current
150 mA
Securing of brake Compax3M
3.15A
Braking operation Compax3S0xxV2 1AC
Controller type
S025V2
S063V2
Capacitance / storable energy
560
μ
F / 15Ws
1120
μ
F / 30Ws
Minimum braking- resistance
100
Ω
56
Ω
Recommended nominal power rating
20 ... 60W
60 ... 180W
Maximum continuous current
8A 15A
4
Max. differential input between SIN- (X13/7) and SIN+ (X13/8).
5
Max. differential input between SIN- (X13/7) and SIN+ (X13/8).
6
Max. differential input between SIN- (X13/7) and SIN+ (X13/8).
