Parker EME
Setting up Compax3
192-120101 N11 C3I11T11 November 2007
111
4.4.2.1
Monitor information
1:
Display of the trigger information
2:
Display of the operating mode and the zoom setting
2a:
Green indicates, that a measurement is active (a measurement can be
started or stopped by clicking here).
2b:
Active channel: the active channel can be changed sequentially by clicking
here (only with valid signal source).
3:
Trigger point for Single and Normal operating mode
4:
Channel information: Type of display and trigger settiing
5:
X-DIV: X deviation set
6:
Single channel sources
Cursormodes/ -functions
Depending on the operating mode, different cursor functions are available within
the osci monitor.
The functions can be changed sequentially by pressing on the right mouse button.
Cursor Symbol
Function
Set Marker 1
the measurement values of the active channel as well as the y
difference to marker 2 are displayed
Set Marker 2
Delete and hide marker
Move offset of the active channel.
The yellow symbol indicates that the scrolling is active.
Set trigger level and pretrigger
