Setting
up Compax3
Positioning via digital I/Os
76
192-120101 N11 C3I11T11 November 2007
Configuration sequence:
The Compax3 ServoManager can be installed directly from the Compax3
DVD. Click on the appropriate hyperlink or start the installation program
"C3Mgr_Setup_V.... .exe" and follow the instructions.
PC requirements
Recommendation:
Operating system:
MS Windows XP SP2 / MS Windows 2000 as from SP4 / (MS Vista)
Browser:
MS Internet Explorer 6.x
Processor:
Intel Pentium 4 / Intel Core 2 Duo / AMD Athlon class as from
>=2GHz
RAM memory:
>= 1024MB
Hard disk:
>= 20GB available memory
Drive: DVD
drive
Monitor:
Resolution 1024x768 or higher
Graphics card:
on onboard graphics (for performance reasons)
Interface: USB
Minimum requirements:
Operating system:
MS Windows XP SP2 / MS Windows 2000 as from SP4
Browser:
MS Internet Explorer 6.x
Processor: >=
1.5GHz
RAM memory:
512MB
Hard disk:
10GB available memory
Drive: DVD
drive
Monitor:
Resolution 1024x768 or higher
Graphics card:
on onboard graphics (for performance reasons)
Interface: USB
Note:
For the installation of the software you need administrator authorization on the
target computer.
Several applications running parallelly, reduce the performance and operability.
especially customer applications, exchanging standard system components
(drivers) in order to improve their own performance, may have a strong influence
on the communication performance or even render normal use impossible.
Operation under virtual machines such as Vware Workstation 6/ MS Virtual PC is
not possible.
Onboard graphics card solutions reduce the system performance by up to 20%
and cannot be recommended.
Operation with notebooks in current-saving mode may lead, in individual cases,
to communication problems.
Your PC is connected with Compax3 via a RS232 cable (
SSK1
(see page 289)).
Cable
SSK1
(see page 289) (COM 1/2-interface on the PC to X10 on the Compax3
or via adapter SSK32/20 on programming interface of Compax3H).
Start the Compax3 servo manager and make the setting for the selected interface
in the menu"
Options Communication settings RS232/RS485...
".
In the menu tree under device selection you can read the device type of the
connected device (Online Device Identification) or select a device type (Device
Selection Wizard).
Installation of the C3
ServoManager
Connection between
PC - Compax3
Device Selection
