![background image](http://html1.mh-extra.com/html/oval/el-2310-05e-series/el-2310-05e-series_manual_1662133029.webp)
E-022-4-E
29
Fig.2
Fig.3
Fig.4
⑥
When the previous settings are replaced with the new settings just entered in response to clicking on
"OK"
,
a message box as shown in Fig. 52 appears. Clicking on "OK" button at this point completes the
setup.
⑦
After clicking on "OK" button, the message box for filling in fields of items appears again. Click on
"Cancel" button to hide the message box for filling in fields of items.
To abort setup process, click on "Cancel" button in the course of steps
②
through
④
.
3.6.11 Burst Mode Setup (HART output)
①
Click on
"
Setup (S)
"
at top
-
level menu of the screen, select
"
HART output
"
from
"
Conf. output
"
drop
-
down list, and click on again.
②
A message box as shown in Fig. 3 appears. Burst mode is set up at this window.
③
The burst mode is a function in which the process data are continuously transferred from the flowmeter
transmitter.
To use the burst mode, click on "ON" at the burst mode window, click on the arrow at right of "Burst
option" as shown in Fig. 54, and select from the drop-down list the type of data to be transferred.
The process data acceptable for transferring continuously in the burst mode are
"
PF.
"
,
"
PF.
%
range/
current
"
, and
"
Process variable/current
"
.
・
"
PF.
"
: Instantaneous value of the item set at Analog output
・
"
PF.
%
range/current
"
: Current magnitude (mA) of Analog output ,
%
range
・
"
Process variable/current
"
: Current magnitude (mA) of Analog output , instantaneous value of the
item set at Analog outputs and 2, Total flow (Diff. Total) of the item set at Pulse output
Summary of Contents for EL 2310-05E Series
Page 71: ...E 022 4 E 71...