E-022-4-E
2
3.7.12 Trim Analog Output 2 (Trim Analog 2)
Analog output 2 of the flowmeter transmitter is trimmed here. Trimming the analog output 2 can be made
in the procedure similar to steps
①
through
⑫
in Section "3.7.11 Trim Analog Output 1".
3.8 Menu : Review (a list of setup parameters)
At Review, you can review a list of parameters set up in "3.6 Setup"
.
"Review" is dedicated for reviewing
available information. You cannot change parameters at the Review window.
3.8.1 Transmitter Status (Xmtr status)
Transmitter status is indicated at this window.
①
Click on "Review (R)" at the top-level menu of the screen, select "Xmtr status" and click on again.
②
A message box like the one shown in Fig. 114 appears. You can grasp the status of the transmitter
.
Click here.
Fig.3
Fig.4
"Write protect" shows whether the transmitter is retractable.
・
"Not write protected" : Parameters are alterable. Adjustments are acceptable.
・
"Write protected" : Parameters are not alterable. Adjustments are not acceptable.
③
To hide the message box for acknowledging the status of the transmitter, click on "Cancel"
.
Summary of Contents for EL 2310-05E Series
Page 71: ...E 022 4 E 71...
