E-022-4-E
43
④
In response to clicking on "OK" button, a preselected simulated output appears. While this simulated
output stays on, a message "Simulated output is provided now..." appears as shown in Fig. 90.
To stop the simulated output, click on "Stop" button.
Fig.90
⑤
In response to clicking on "Stop" button, a message box like the one shown in Fig. 91 appears.
Click on "OK" button.
Fig.9
⑥
Clicking on "OK" button returns the screen to the Fix Status output message box. Click on "Cancel"
button to hide the Fix Status output message box.
3.7.7 Loop Test of Status Input (Status input)
The status of status input is shown here.
①
Click on "Diag/Service (T)" at top-level menu of the screen, select "Status input" from the "Loop test"
drop-down list, and click on again.
②
A message box like the one shown in Fig. 92 appears, indicating the current status of status input
either "Short" or "Open"
.
On acknowledging the status, click on "Cancel" button to hide the Status input
message box.
Fig.92
Summary of Contents for EL 2310-05E Series
Page 71: ...E 022 4 E 71...