Oval EL 2310-05E Series, Manual

Page: 66 / 72

E-022-4-E
66
3.16 Parameters
NOTES : No. 3 and are items available for CT940 (MT94) and MT943 only.
No. 9 through 6 are not included in the EV920.
About Settings
Factory set : Parameters are set up before the product is shipped from the factory. Do not attempt to alter
settings in the field.
Specs. set : Specifications are factory set according to the customer specifications. If later changes are desired,
new settings must meet the operating environment.
Factory setting : Note here the parameter at the time of shipment from the factory.
Update setting : Note here the parameter following later changes made.
No. Item Description Type of Setup Factory Setting Setting Value
Assign
Analog output Analog output select Specs. set
2 Analog output 2 Analog output 2 select Specs. set
3 Pulse output Pulse output select Specs. set
Config fld dev vars
4 Mass flow unit Mass flow unit select Specs. set
Vol flow unit Volume flow unit select Specs. set
6 Flow direction Flow direction select Specs. set
7 Flow damp (Mass) Flow (mass) damping Specs. set
8 Flow cutoff Flow (mass) cutoff Specs. set
9 Dens unit Density unit select Specs. set
0 Dens damp Density damping Specs. set
Slug low limit Lower limit density of slug flow Specs. set
2 Slug high limit Upper limit density of slug flow Specs. set
3 Slug duration Duration to identify slug flow Specs. set
4 Compensation Density compensation Specs. set
Standard temp Reference temp. Specs. set
6 Expansion coef Expansion coefficient Specs. set
7 Temp unit Temp. unit select Specs. set
8 Temp damp Temp. damping Specs. set
Analog output 1
9 URV 20mA flowrate of Analog out Specs. set
20 LRV 4mA flowrate of Analog out Specs. set
2 Lowcut Low cutoff of Analog out Specs. set
22 Added damp Added damp of Analog out Specs. set
Analog output 2
23 URV 20mA flowrate, Analog out 2 Specs. set
24 LRV 4mA flowrate, Analog out 2 Specs. set
2 Lowcut Low cutoff, Analog output 2 Specs. set
26 Added damp Added damping, Analog out 2 Specs. set