E-022-4-E
63
3.12 If There is No Response
If communication fails for some reason between the PC and the flowmeter connected according to the
procedure outlined in "3.2 Starting the LinkTop and Connection" or while running on this application
software, you will see a window like the one shown in Fig. 130. If such an event happens, click on "OK"
button and run the following checks :
◇
Is the probe and/or connections of Smart Communication Unit properly in position?
◇
Is power supplied to the flowmeter transmitter?
If trouble persists following the above checks, make connections all over again according to the
procedure outlined in "3.2 Starting the LinkTop and Connection"
.
3.13 If Connecting the Flowmeter Fails
When the flowmeter is connected according to the procedure outlined in "3.2 Starting the LinkTop and
Connection"
, you will see a message box like the one shown in Fig. 3 if a transmitter not compatible
with this application software is connected. In a case like this, click on "OK" button and run the following
check :
◇
Is the type of transmitter connected compatible with the application software now running?
If trouble persists following the above check, make connections all over agin according to the
procedure outlined in "3.2 Starting the LinkTop and Connection"
.
Fig.30
Fig.3
Summary of Contents for EL 2310-05E Series
Page 71: ...E 022 4 E 71...