E-022-4-E
44
3.7.8 Key Protect
This validates or invalidate the key operation (zeroing or total flow reset) from the LCD. With this feature
"ON"
, key operation for zeroing and total flow reset remains disabled.
①
Click on
"
Diag/Service (T)
"
at the top
-
level menu of the screen, select
"
Key protect
"
from the
"
Loop
test
"
drop
-
down list and click on again.
②
A message box like the one in Fig. 93 Appears. Select key operation
"
ON
"
or
"
OFF
"
and click on
"
OK
"
button.
Fig.93
③
A message box like the one in Fig. 94 appears. If it is desired to change key operation status, click on
"OK"
.
To cancel, click on "Cancel"
.
④
Click on "OK"
. A change in the setting now causes a message box as shown in Fig. 9 to appear. Click
on "OK" button to complete the setup process.
⑤
Following the "OK" button click, the screen returns to a message box for entering menu items.
Click on "Cancel" button to close the message box for entering menu items.
To abort the setup process, click on "Cancel" button between steps
②
and
③
.
Fig.94
Fig.9
Summary of Contents for EL 2310-05E Series
Page 71: ...E 022 4 E 71...