![background image](http://html1.mh-extra.com/html/oval/el-2310-05e-series/el-2310-05e-series_manual_1662133045.webp)
E-022-4-E
4
3.7.9 Zero Point Adjustment (Auto Zero)
Flowmeter transmitter can be zeroed for flow measurement at this menu.
①
Click on "Diag/Service (T)" at top-level menu of the screen, select "Auto Zero" from the Calibration"
drop-down list, and click on again.
Click here.
Fig.96
②
A message box as shown in Fig. 97 appears. Stop the flow completely first and then click on "OK"
.
③
A message box like the one in Fig. 98 appears. If you want to run a zeroing, click on "OK"
.
To abort it, click on "cancel"
.
④
It takes about 30 seconds to complete the process of zeroing. While zeroing is in progress, a message
box as shown in Fig. 99 appears.
Fig.97
Fig.98
Fig.99
Summary of Contents for EL 2310-05E Series
Page 71: ...E 022 4 E 71...