E-022-4-E
6
Fig.23
Fig.24
Fig.22
③
Assign individual items : click on the arrow mart at right of the field and select your option from the
drop-down list as shown in Fig. 22.
At "Analog output 1" and "Analog output 2"
,
an item "Volume Flow" is not available.
In "Analog output 1" and "Analog output 2"
,
neither "Volume Flow" nor "Density" menu item is shown.
④
After filling in all the fields required, click on "OK" button. A message box as shown in Fig. 23 then
appears.
Clicking on "OK" at this point changes the previous settings to the new settings just entered. However,
the flowmeter output also changes with the changes in settings made. For safety's sake, therefore,
in applications where the flowmeter output controls a valve (s) or other devices, it is necessary that the
control loop be switched to manual control to ensure that the control loop is unaffected by the flowmeter
output.
⑤
When the previous settings are replaced with the new settings just entered in response to clicking on
"OK"
,
a massage box as shown in Fig. 24 appears. Clicking on "OK" button at this point completes the
setup.
⑥
After clicking on "OK" button, the message box for filling in fields of menu items appears again.
Click on "Cancel" button to hide the setup message box.
To abort the setup process, click on "Cancel" button in the course of steps
②
through
④
.
Summary of Contents for EL 2310-05E Series
Page 71: ...E 022 4 E 71...