![background image](http://html1.mh-extra.com/html/omron/z500-series/z500-series_operation-manual_743394066.webp)
64
SECTI
ON 4
4-1 Setting
Measurem
e
nt Con
d
it
ion
s
Using
th
e Expert Menu
s
Z500
Operation Manual
SECTION 4
Menus for Expert Menu
Step
3
Position Compensation
The position compensation function is used when the position of the measurement workpieces are not
consistent.
By using this function, the displacement between the reference position and the current position is
obtained, and this displacement is compensated for in measurements. Compensation can be made for
both height and position.
• Reference Position
The measurement range and measurement workpiece are in the correct
positions.
•
When the Position of the Workpiece is Lower
Height
Position
FAR
NEAR
[ 15]
[ 170]
[ .]
[ ]
9.96ms
BRIGHT
DARK
Sen0
LV
PEAK
LV
PEAK
Sen1
Scn 0 Run
Measurement point
Low
High
Sensor
Workpiece
Measurement range
Measurement center
Height
FAR
NEAR
[ 15]
[ 170]
[ .]
[ ]
BRIGHT
DARK
9.96ms
Sen0
LV
PEAK
LV
PEAK
Sen1
Scn 0 Run
Measurement point
By making position displacement compensation settings ...
For measurement, compensate the height based on the displacement of the reference position.