16
SECTION 1
1-2 Op
eratio
nal F
low
Z500
Operation Manual
SECTION 1
Features
1-2-2 Menus for Expert Menu
Setting Detection Conditions and Executing
Starting Up Expert Menu and Entering Set Mode
Refer to page 54,
Step 1 : Starting Up
Expert Menu and Entering Set Mode.
Adjusting Images
Refer to page 56,
Step 2 : Adjusting Images.
Setting Measurement Conditions
(if necessary)
Refer to page 88,
Step 5 : Measurement Conditions.
Selecting and Setting Measurement Items
Refer to page 70,
Step 4: Measurement Settings.
Starting Measurements
Refer to page 107,
Step 7 : Performing Measurement.
Setting Output Contents
Refer to page 100,
Step 6 : Output Settings.
Setting Position Compensation
(if necessary)
Refer to page 64,
Step 3 : Position Compensation.
Selecting Measurement Item
Appropriate to the
Measurement Goal
Height
Step: 2 pts
Step: 3 pts
Edge position
Width
Edge center
Define
Refer to page 70.
Preparations for Detection
Turn ON the power.
Displaying Images on the Monitor
Refer to page 20,
2-1
Starting the Z500 and Displaying Images.
Screen Types and Display Methods
Refer to page 29.
Refer to page 54 for information on
settings using Expert Menu.
Refer to this section to learn about the basic
operational flow from setting measurement
conditions to executing measurements.
CHECK