Z500
Operation Manual
SE
CTION 2
2-3 Screen
Typ
es and
Disp
lay Meth
od
s
35
SECTION 2
Basic Operations
2-3-3 Digital Monitor
Mostly used during line operation.
Two or more measurement results that have been set for the output numbers of the displayed scenes will
be displayed.
CHECK
The measurement items can also be displayed instead of the judgment values.
REFERENCE
Refer to page 117.
9.96ms
4 +0002.65432mm
PASS
HI=+0010.00000
LO=-0010.00000
5 +0004.65432mm
PASS
HI=+0010.00000
LO=-0010.00000
6 +0000.00000mm
ERROR
HI=+0010.00000
LO=-0010.00000
7 -----------mm
HI=+0010.00000
LO=-0010.00000
S+ / :Display S+ENT:Adjust
Scn 0 Run
9.96ms
0 +0002.65432mm
PASS
HI=+0010.00000
LO=-0010.00000
1 +0004.65432mm
PASS
HI=+0010.00000
LO=-0010.00000
2 +0000.00000mm
ERROR
HI=+0010.00000
LO=-0010.00000
3 -----------mm
HI=+0010.00000
LO=-0010.00000
S+ / :Display S+ENT:Adjust
Scn 0 Run
Measurement value
Output number
Press the
TRIG
Key to switch the number.
Judgment result
TRIG
TRIG
---- will be displayed for output numbers
that have not been set.
Judgment value
The judgment value for each
output number will be displayed.
HI: Judgment upper limit
LO: Judgment lower limit
9.96ms
0 +0002.65432mm
PASS
1 +0004.65432mm
PASS
2 +0000.00000mm
ERROR
3 -----------mm
S+ / :Display S+ENT:Adjust
Scn 0 Run
Step: 2 pts
Width
Define
Measurement items