manualshive.com logo in svg

Omron SYSMAC NY Series, Hardware User Manual

Share
Download
Omron SYSMAC NY Series Hardware User Manual Download Page 50

3-2-2

ERR LED Indicator

The Error LED (ERR) indicates the presence and type of an error within the Industrial Box PC.

Color

Status

Meaning

Red

Not lit

•

The 24 VDC power is not supplied

•

No error is present

Blinking

•

Fan Error

•

Battery low

Lit

•

Thermal shutdown

•

Watchdog Error

•

Power Supply undervoltage error

•

Power Supply overvoltage error

•

Power supply defective

Additional Information

• The status of this LED can also be defined by users using the Industrial PC System API.

Refer to 

NY-series Operating Systems and Software Utilities Manual (Cat. No. W616)

 for In-

dustrial PC System API for API details.

• Refer to 

7-2 Corrective Maintenance

 on page 7-4 for actions to solve errors.

3-2-3

HDD LED Indicator

The Hard Disk Drive LED (HDD) indicates activity of the HDD or SSD.

Color

Status

Meaning

Yellow

Flickering

The HDD or SSD or CFast is active.

3-2-4

RUN LED Indicator

The RUN LED is available for user applications.

Color

Status

Meaning

Green

Not lit

User-defined.
The status can be defined in a user program using the
Industrial PC System API.

Blinking

Lit

Additional Information

Refer to 

NY-series Operating Systems and Software Utilities Manual (Cat. No. W616)

 for Indus-

trial PC System API for API details.

3 Hardware

3-8

NY-series Industrial Box PC Hardware User's Manual (W553)

Summary of Contents for SYSMAC NY Series





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands