Omron NX-ECC201, User Manual, Page: 195 / 406

9 - 25
9 Setting Up Slave Terminals
NX-series EtherCAT Coupler Unit User’s Manual (W519)
9-
2 Sett
ing
Slave T
er
m
inal
P
a
ra
m
ete
rs
9
9-2-
6 Unit Application Dat
a
The Unit application data is the data that enables the functionality that is specific to each NX Unit. Not
all NX Units have Unit application data.
Refer to the manual for NX Units that have Unit application data for the method to set and transfer Unit
application data.
You can use the following functions on the Sysmac Studio.
• Comparing and merging with actual Unit configuration of the Slave Terminal
• Getting NX Unit serial numbers
• Exporting/importing Slave Terminal settings and NX Unit settings
You can compare the Unit configuration information in an EtherCAT Slave Terminal that was created
offline with the actual Unit configuration. You can also use this command to merge a configuration that
was created offline with the actual configuration.
1
Go online, right-click anywhere in the Edit Slave Terminal Configuration Tab Page, and select
Compare and Merge with Actual Unit Configuration .
The actual Unit configuration is read and compared with the Unit configuration on the Sysmac
Studio. The results are displayed in the Compare and Merge with Actual Unit Configuration Dia-
log Box.
2
To merge with actual Unit configuration, click the Apply Actual Unit Configuration Button.
The configuration information on the Sysmac Studio will now match the actual Unit configura-
tion.
3
Click the OK Button.
The display returns to the Edit Slave Terminal Configuration Tab Page.
9-2-6 Unit Application Data
9-2-7 Sysmac Studio Functions Used as Required
Comparing and Merging with Actual Unit Configuration of the Slave
Terminal