Olivetti Copia 9916, User Manual

Page: 92 / 526

Chapter 3 Speed Dialling
3-23
Speed Dialling
Changing/Deleting a One-Touch Speed Dialling Entry
If you want to change a one-touch speed dialling entry or delete all
information stored under a button, follow the instructions in “Registering
Numbers for One-Touch Speed Dialling” (
1
p. 3-8) but note the
following:
❏
In step 5 (
1
p. 3-9), select the entry you want to change or delete.
❏
For all other steps when you are required to make an entry:
• To correct an entire entry, press the
Clear
button, then enter the
new information.
• To correct a single digit in the fax/telephone number, use the
l
button to move the cursor below the digit you want to change,
press the F4 ( DELETE ) button, then enter the correct digit.
• To correct a character in the name, press the F2 ( DELETE ) button.
Every time the F2 button is pressed, the rightmost character is
deleted. Enter the correct character(s).
❏
If you want to delete all information registered under a button, press
the
Clear button in step 8 (
1
p. 3-10) , then press the Set button. To
return to standby mode, press the Stop button.