Olivetti Copia 9916, User Manual

Page: 512 / 526

G-12
Glossary
• Memory Clear Report
If power to your unit is cut off for more than three hours, the
documents stored in memory will be erased. After power is restored,
a Memory Clear Report will print to show you the documents that
have been erased. If power is restored within three hours, the
documents are not erased and no report prints.
• Multi TX/RX Report
When you send a document to more than one destination, your unit
prints a report to show you the name and numbers of the other
parties, whether the transactions were completed or not, and errors if
any. Your unit automatically prints multi-transaction reports for
sending documents to more than one destination, delayed sending
documents to more than one destination, sending documents
through a relay fax to more than one destination, and sending
confidential documents to more than one destination, if the
mailboxes are the same on every fax unit.
• Relay Broadcast Report
After sending a document through a relay fax, you may receive a
relay broadcast report from the fax unit that relayed the document.
This shows whether or not the document was successfully relayed to
all the final destinations. To receive a report, the other fax unit must
be set to print a relay broadcast report.
Resolution
The density of dots for an output device like a fax unit and expressed in
terms of dots per inch (dpi). Low resolution causes font characters and
graphics to have a jagged appearance. Higher resolution means smoother
curves and angles as well as a better match to traditional typeface
designs. Resolution values are represented by horizontal data and
vertical data, for example, 600
×
600 dpi.
Restricted reception
The ability of your unit to restrict incoming documents. With this feature
turned on, your unit will receive documents only from speed dialling
numbers registered in your unit.
Rotary pulse
A rotary-pulse or pulse dial telephone is dialled by manually rotating a dial
to send pulses to the telephone switching system. When you pulse dial,
you will hear clicks. With tone dialling, you will hear tones.