Olivetti Copia 9916, User Manual

Page: 435 / 526

Chapter 14 Summary of Important Settings
14-5
Summary of
Important Settings
Feature Setting Name Default Description
Pause length PAUSE TIME A pause entered within a number is set for four
seconds*. You can lengthen this pause from 4 to
11 seconds**. A pause entered at the end of a
number is fixed at 10 seconds and cannot be
adjusted. (
1 pp. 3-3, 14-18)
Redialling AUTO REDIAL If the other party’s line is busy, the unit is set to
perform two redialling attempts at two
minute*** intervals. You can increase the
number of redial attempts and the length of the
interval between attempts. If an error occurs
during redialling, the unit is set to resend the
first page of the document and the pages from
where the error occurred. (
1
pp. 4-38, 14-18)
Transmission error:
ERASE FAILED TX
If a transmission error occurs, the document
document in memory remains in memory. You can set the unit to
erase the document from memory if an error
occurs during transmission. (
1
p. 14-18)
Speed TX START SPEED The starting speed for sending is set to
33600 bps. Slower settings are available.
(
1
p. 14-33)
Stamp
TX STAMP
The unit stamps documents sent using direct
and memory sending.
(
1
pp. 4-12, 14-18)
** * Two seconds in Australia, Singapore, Ireland, New Zealand, and Malaysia
* ** 1-15 seconds for Australia, Singapore, Ireland, New Zealand, and Malaysia
*** Six minutes in New Zealand