Olivetti Copia 9916, User Manual

Page: 442 / 526

14-12
Summary of Important Settings Chapter 14
Set
07 PROGRAM KEY REG.
Set to streamline a
procedure when you
press the
Program
button. (
1
p. 10-12)
01 PRINT REPORT
Set the
Program
button to print a TX report.
Set
06 DENSITY CONTROL
Adjust the scanning
density. (
1
p. 4-19)
Set
01 LIGHT
Select LIGHT to finely
adjust it.
Finely adjust the LIGHT
setting.
05 TX TERMINAL ID
Set
Print your TTI (Transmit
Terminal ID) information
on every page you send.
(
1 p. 2-20)
01 ON
Set
Select to print your TTI
information on all faxes
you send.
01 TTI POSITION
Set
Determine the position of
the TTI information.
01 OUTSIDE IMAGE
Print the TTI information
outside the image border.
04 SENDER NAME REG.
Set
Register up to nine
alternate sender names.
(
1 p. 2-28)
SELECT SENDERS NAME
Set
Select a free line to
register an alternate
name.
ENTER A NAME
Enter the sender’s name.
03 UNIT NAME
Set
Register your name or
company name for the unit.
(
1
p. 2-24)
ENTER UNIT NAME
Enter your name or
company name.
01 DATE/TIME SETTING
Set
Register the current date
and time.
(
1
p. 2-22)
DATE/TIME SETTING
Enter the date and time
using the 24-hour format.
02 UNIT TEL NUMBER
Set
Register the fax/
telephone number.
(
1
p. 2-24)
UNIT TEL NUMBER
Enter your fax/telephone
number.
02 OFF
Select not to print your
TTI information on faxes
you send.
02 TEL NUMBER MARK
Select the prefix before
your number.
02 INSIDE IMAGE
Print the TTI information
inside the image border.
01 FAX
Prefix your number with
FAX.
02 TEL
Prefix your number with
TEL.
Set
Set
02 STANDARD
Select STANDARD to
finely adjust it.
Finely adjust the
STANDARD setting.
Set
03 DARK
LIGHT
STANDARD
DARK
Select
DARK
to finely
adjust it.
Finely adjust the
DARK
setting.
02 REPORT
Set the Program button to print a report.
03 M-KEY
Set the Program button to have the same function
as the M button.*
04 TONE
Set the Program button to have the same function
as the Tone/+ button.
05 SENDER’S NAME
Set the Program button to select a sender’s name.
06 SUBADDRESS
Set the Program button to select the subaddress.
07 RX MODE
Set the Program button to select the receive mode.
User Settings Menu
Default settings are shown in italic type.
* UK only. The default setting
for all other countries is
printing a TX report.