Olivetti Copia 9916, User Manual

Page: 81 / 526

3-12
Speed Dialling Chapter 3
To perform optional settings, follow the instructions below,
“Optional Settings”.
❏
If you want to return to standby mode during any operation,
press
Stop .
❏
In order to remember the numbers you have registered under
the one-touch speed dialling buttons, write the names on the
destination labels provided with your unit. Then stick each
label above the corresponding one-touch speed dialling
button.
❏
If you have registered several one-touch speed dialling entries,
you may not be able to register up to 120 digits for the fax/
telephone number because the memory level may be low.
❏
To use one-touch speed dialling, see “Using One-Touch Speed
Dialling”. (
1
p. 3-49)
❏
You can see all numbers registered for one-touch speed
dialling by printing a list of registered entries. (
1
p. 3-59)
❏
If you have registered both fax and telephone numbers under
the one-touch speed dialling buttons, make sure you keep a
record of buttons with fax numbers registered and a record of
buttons with telephone numbers registered. If you mistakenly
press a button containing a telephone number instead of a fax
number, the unit will continually redial the other party in an
attempt to get a reply.
Optional Settings
After completing the steps above, you may want to set up the optional
settings for a fax number registered under a one-touch speed dialling
button. Follow the procedure below.
1. Perform steps 1 to 12. (
1
p. 3-8)
Set
2. Press
Set
.
OPTIONAL SETTING
SELECT AN ITEM 01 OFF
02 ON