Oce ColorWave 650 User Manual Download Page 285

Page: 285 / 336

Description

'Color feel'

Use this setting to get a print with colors similar
to a non-Océ printer that prints without color
correction.

'Simulated non-Océ printer: no
color correction'

Use this setting if your color management is com-
pletely done by the application that generated the
print file.

If color management is not handled correctly by
the application, possible problems are:

• - blue will be purplish (like in most other inkjet

printers)

• - raster-file information (like photos) will look

dull and dark.

'None, managed by application'

The output quality of a simulated non-Océ printer setting depends on the selected input

profile for simulated printers. Make sure you use the correct input profile for simulated
printers.
Océ ColorWave 650 Poster Printer path:

Support - Input profiles

Chapter 8 - Print quality and Print productivity

285

What is Color feel?

Summary of Contents for ColorWave 650

















































































































































































































































































































































Search results

Summary of Contents for ColorWave 650

Reviews:

Related manuals for ColorWave 650

Brands by name

Popular brands

Oce ColorWave 650, User Manual

Search results

Summary of Contents for ColorWave 650

Reviews:

Related manuals for ColorWave 650

Brands by name

Popular brands