Oce ColorWave 650, User Manual

Page: 99 / 336

Set another language for the Océ Express WebTools
Introduction
The language setting of the internet browser you use defines the language in which the
user interface of the Océ Express WebTools is displayed.
Note:
This language setting does not influence the language on the printer operator panel. On
the operator panel, you can only toggle between the 'First language' and the 'Second
language'. You can define the values for the 'First language' and the 'Second language'
in the regional settings of the Océ Express WebTools (see
‘Configure the regional settings
of the Océ ColorWave 650 Poster Printer’ on page 130 ).
Note:
If the selected language cannot be supported, the standard user interface language for
the Océ Express WebTools will be US English.
Purpose
Change the language setting of the user interface of the Océ Express WebTools.
How to change the language setting in Microsoft Internet Explorer
1.
Open Microsoft Internet Explorer.
2.
Select Tools menu - Internet options. The internet options window appears.
3.
Make sure the General tab is selected.
4.
Click the Languages button in the lower part of the window. Another window opens.
5.
Select the language of your choice. A new language can be added to the list with the Add
button.
6.
Move the newly added language up in the list to the top position.
7. Click OK to confirm or Cancel to close both windows again.
8.
Click Refresh in the toolbar or open another page. The language of the application will
be changed.
Note:
The Internet options may be found under a different menu depending on which version
of Microsoft Internet Explorer version you use.
Chapter 4 - Configure the printing system 99
Set another language for the Océ Express WebTools