Oce ColorWave 650, User Manual

Page: 104 / 336

Load the settings from a file
Purpose
Load the settings and the values for the Océ Express WebTools from a file.
When to do
Load the settings from a file to:
• Duplicate the settings to another printer of the same type.
Note:
When you are logged in as a Key operator you can only load the Key operator settings.
When you are logged in as a System administrator you can only load the System admin-
istrator settings. To load all the settings that are stored in the file you must log in as a
Power user.
Note:
Not all settings are stored in the settings file. The network settings are excluded from
the file because the network settings cannot be duplicated to another printer. The pass-
words for authorized users are excluded from the file for security reasons. License infor-
mation is not included in the file either.
How to load the settings from a file
1.
Open the 'Configuration' tab or the 'Preferences' tab.
2. Click 'Open set' in the upper right-hand corner of the screen. A secondary window opens.
3.
Navigate to a location on the network and select the settings file.
4.
Click 'Ok' to load the settings file or 'Cancel' to close the window without loading the
settings file.
In some cases a reboot dialog appears.
Result
The values of the settings in the settings file overwrite the current values. The network
configuration settings of the system and the passwords are not loaded to prevent connec-
tivity problems and to guarantee the integrity of the passwords.
Chapter 4 - Configure the printing system 104
Load the settings from a file