Oce Arizona 550 GT, User Manual

Page: 114 / 263

A: Load Supply Media Roll On a Media Shaft
1.
Place an empty media shaft on a suitable flat work area, positioned as shown, so that the
hex key is inserted on the right side of the shaft to lock and unlock the core locks.
[72] Unlock the Media Shaft Core Locks
2.
To unlock the media shaft core locks (1) turn counter-clockwise with the supplied 5mm
hex key (2).
3.
Slide a new roll of media onto the supply shaft.
Note:
Determine first whether you need the roll to be print side out or in. "Print side out"
means that the media unrolls from the bottom of the shaft. "Print side in", means that
the media unrolls from the top of the shaft (see the diagram in section C "Thread the
Media").
4.
Roughly center the roll on the shaft, and then insert the shaft into the Supply (bottom)
position on the printer.
Chapter 6 - How to Operate the Roll Media Option 114
How to Load Media