NXP Semiconductors freescale semiconductor MC13211, Reference Manual

Page: 20 / 372

MC1321x Introduction
MC1321x Reference Manual, Rev. 1.6
1-2 Freescale Semiconductor
NOTE
• The MC1321x now uses an updated version of the 689S08A 8-bit
microprocessor to correct errata associated with the onboard FLL and
reset pin. Refer to the associated errata for this new device,
Document
Number MSE9S08GB60A_4L11Y , on the Freescale web site.
• The MC1321x also now uses an updated version of the transceiver
device that is functionally fully compliant with earlier versions of the
transceiver. See MC1321x errata on the Freescale web site.
However, for proper performance of the radio the following modem registers must be
over-programmed:
Register 0x31 to 0xA0C0
Register 0x34 to 0xFEC6
These registers must be over-programmed for MC1321x devices in which the modem Chip_ID
Register 0x2C reads 0x6800.
Applications include, but are not limited to, the following:
• Residential and commercial automation
— Lighting control
— Security
— Access control
— Heating, ventilation, air-conditioning (HVAC)
— Automated meter reading
• Industrial Control
— Asset tracking and monitoring
— Homeland security
— Process management
— Environmental monitoring and control
— HVAC
— Automated meter reading (AMR)
• Health Care
— Patient monitoring
— Fitness monitoring
• Consumer
— Human interface devices (keyboard, mice, etc.)
— Remote control
— Wireless toys