![Nortel CallPilot 1001rp Installation And Configuration Manual Download Page 69](http://html1.mh-extra.com/html/nortel/callpilot-1001rp/callpilot-1001rp_installation-and-configuration-manual_1707126069.webp)
October 2002
Using serial port diagnostic tools
Part 5: 1001rp Server Maintenance and Diagnostics
69
To invoke the TSTSERIO /P command from Windows NT 4.0
1
Click Start
➝
Programs
➝
Command Prompt
to display the MS-DOS
command prompt window.
Result:
The MS-DOS Command Prompt window appears.
2
At the MS-DOS prompt, type
tstserio
with the required parameters, and
then press Enter.
For example, type
TSTSERIO /P
com1
or
TSTSERIO /P com 2
,
and
then press Enter.
3
Type
Exit
, and then press Enter to exit MS-DOS.
TSTSERIO external loopback plug subtests
The following external loopback subtests are available for the TSTSERIO
command. For each of these tests, an external loopback connector must be
used. For more information, see “Conducting TSTSERIO tests with the
loopback plug” on page 71.
Subtest
name
Description
edata
External data bus loopback. This test requires an external
loopback connector.
emsr
External modem status register. This test requires an
external loopback connector.
eint
Test ability of device to generate interrupts. This test
requires an external loopback connector.
Summary of Contents for CallPilot 1001rp
