Nortel CallPilot 1001rp, Installation And Configuration Manual

Page: 111 / 368

October 2002 Using CallPilot Manager to monitor hardware
Part 5: 1001rp Server Maintenance and Diagnostics 111
Note: For an explanation of the channel states, refer to the CallPilot
Manager online Help .
2 Do one of the following:
3 Click Courtesy Stop, Stop, or Start as required.
Result: If you clicked Courtesy Stop or Stop, you are asked to confirm
the Courtesy Stop or Stop. Click OK.
The selected channels change to off-duty or on-duty status, according to
the action you chose.
Note: If the buttons are not available, wait a few seconds for the page to
refresh.
IF you want to stop or start THEN
all of the channels
associated with a DSP check the check box to the left of the
DSP that you want to stop or start.
Repeat this step for each DSP.
only one or several
channels that are
associated with a DSP check the check box for each
channel that you want to stop or
start.