Nortel CallPilot 1001rp, Installation And Configuration Manual

Page: 316 / 368

Maintaining the Pentium II SBC card Standard 1.0
316 CallPilot
Replacing a Pentium II with a Pentium III
SBC card
Introduction
You should replace the Pentium II SBC card when it fails or when a Pentium
III upgrade is desired. Use system diagnostic tools and refer to error codes
to determine whether the SBC card should be replaced.
The Pentium III SBC is always installed in the SBC slot located between the
ISA expansion slots and the PCI slots on the backplane. The board provides
headers for peripheral connections, jumper blocks, and DIP switches. It also
provides two DIMM sockets to support up to 512 Mbytes PC100 SDRAM.
.
DANGER
Risk of electric shock
High current inside the chassis can cause severe injury.
.
CAUTION
Risk of equipment damage
Take precautions to protect internal components. Electrostatic
discharge (ESD) can render boards damaged or unusable. Wear
an ESD wrist strap.
.
CAUTION
Risk of equipment damage
Handle the SBC carefully. If you drop the SBC, it can be
damaged irreparably.