Nortel CallPilot 1001rp, Installation And Configuration Manual

Page: 30 / 368

Troubleshooting your CallPilot system Standard 1.0
30 CallPilot
2-3-2-3 66 Configure advanced cache registers
2-3-3-1 68 Enable external and CPU caches
2-3-3-2 69 Initialize SMI handler
2-3-3-3 6A Display external cache size
2-3-4-1 6C Display shadow message
2-3-4-3 6E Display non-disposable segments
2-4-1-1 70 Display error messages
2-4-1-3 72 Check for configuration errors
2-4-2-1 74 Test real-time clock
2-4-2-3 76 Check for keyboard errors
2-4-4-1 7C Set up hardware interrupts vectors
2-4-4-3 7E Test coprocessor if present
3-1-1-1 80 Disable onboard I/O ports
3-1-1-3 82 Detect and install external RS-232 ports
3-1-2-1 84 Detect and install external parallel ports
3-1-2-3 86 Reinitialize onboard I/O ports
3-1-3-1 88 Initialize BIOS Data Area
3-1-3-3 8A Initialize Extended BIOS Data Area
3-1-4-1 8C Initialize floppy controller
3-2-1-1 90 Initialize hard-disk controller
Beep code POST code Description / test point