Nortel CallPilot 1001rp, Installation And Configuration Manual

Page: 231 / 368

October 2002 Performing RAID maintenance
Part 5: 1001rp Server Maintenance and Diagnostics 231
20 Press Esc until you return to the DAC960 Configuration Utility main
menu.
Result: The system prompts you to save this new configuration.
21 Select Yes, and then press Enter.
Result: The configuration is saved.
To initialize the RAID system packs
The initialization of the system packs (system drives) completes the
configuration of the RAID system. This takes from 1 to 5 hours, depending
on the size of the hard drives.
1 From the DAC960 Configuration Utility main menu, select Initialize
System Drive, and then press Enter.
Result: The Initialize System Drive menu appears.
2 Select “Select System Drive,” and then press Enter.
Result: The configured system packs appear.
3 Use the arrow keys to navigate to a system drive. Press Enter to select
the drive. Repeat this step for each system drive.
Result: A check mark indicates a selected drive.
4 Press Esc.
Result: The Initialize System Drive menu appears.
5 Select Start Initialize, and then press Enter.
Result: The system prompts you to confirm that you want to initialize this
system drive.
6 Select Yes, and then press Enter.
Result: The system drives are initialized. This takes from 1 to 5 hours,
depending on the size of the hard drives and the number of hard drives.
All system drives are initialized simultaneously.
When the initialization is complete, the system prompts you to press any
key to continue.