Nortel CallPilot 1001rp Installation And Configuration Manual Download Page 210

Page: 210 / 368

Performing RAID maintenance

Standard 1.0

210

CallPilot

Click OK in the Rebuild Message dialog box.

Result:

The Workstation Array Manager window is updated. In the

example in this procedure, the physical drive at Channel 1 ID 3 is now
online, as is logical drive 0.

Repeat steps 6 to 8 for the remaining two offline drives.

Result:

All the physical drives and logical drives are online.

Once all drives have been rebuilt, close the Workstation Array Manager
window.

Result:

You have completed the upgrade procedure.

Summary of Contents for CallPilot 1001rp

















































































































































































































































































































































































Search results

Summary of Contents for CallPilot 1001rp

Reviews:

Brands by name

Popular brands

Nortel CallPilot 1001rp, Installation And Configuration Manual

Search results

Summary of Contents for CallPilot 1001rp

Reviews:

Brands by name

Popular brands