Nortel CallPilot 1001rp, Installation And Configuration Manual

Page: 190 / 368

Performing RAID maintenance Standard 1.0
190 CallPilot
17 Use the arrow keys to perform the following substeps to set the RAID
packs.
1001rp RAID system packs
18 Press Tab to select Save Array.
19 Press Enter to create the first logical drive.
Result: The system prompts you to define the logical drive.
20 Select No because you must define two more drives.
21 Define the second drive as shown above for the server.
22 Press Tab to select Save Array.
23 Press Enter to create the second logical drive.
Result: The system prompts you to define the logical drive.
24 If additional drive packs are to be created, select No.
25 Repeat steps 21 to 23 until all packs are created.
Hard drive bay
SCSI
channel
SCSI ID
System pack/Logical
drive
a
a. RAID pairs (logical drives) consist of the following pairs: hard
drives 1 and 4, 2 and 5, and 3 and 6.
1 (far left) 1 0 0 (primary hard drive)
2 1 1 1 (primary hard drive)
3 1 2 2 (primary hard drive)
4 1 3 0 (secondary hard
drive)
5 1 4 1 (secondary hard
drive)
6 (far right) 1 5 2 (secondary hard
drive)