Nortel CallPilot 1001rp, Installation And Configuration Manual

Page: 60 / 368

Using Windows NT online diagnostic tools Standard 1.0
60 CallPilot
Invoking the chkdsk utility
Introduction
The chkdsk utility checks a specified disk on the server and displays a status
report. It can be run on drives C, D, E, or F. It is an online utility, but it
reduces system performance while it is running.
The chkdsk utility checks for problems at the Windows NT file system level.
Any problems existing at this level can cause problems for CallPilot. Even if
there are no problems at the Windows NT file system level, CallPilot can
still be affected by problems at the CallPilot file system level.
Note: A version of this utility, called autocheck, automatically runs during
Windows NT startup. Output from this utility appears on the startup blue
screen.
Chkdsk utility syntax
The chkdsk utility uses the following syntax:
chkdsk [drive:][path]filename] [/F] [/V] [/R]
Parameter Description
drive: The drive letter of the drive that you want to check.
filename The names of files to check for fragmentation.
/F Add this parameter to fix errors on the disk.
/V Add this parameter to display the full pathname of
every file on the disk.
/R Add this parameter to locate bad sectors and to recover
readable information.