Norstar 7316 System Manual Download Page 94

Page: 94 / 294

/ Using Saved Number Redial

Modular ICS 7.0 System Coordinator Guide

N0000626 03

Using Saved Number Redial

≤ﬂ‡

You can use this feature while you are on an external call that
you dialed to save the number so that you can call it again later.

Each telephone can save one number at a time with Saved
Number Redial, not one number for each line.

Saved Number Redial records a maximum of 24 digits.

Dialing a saved number

Press

≤ﬂ‡

when you are not on a call.

If you have a programmed Saved Number Redial button, you
can use Button Inquiry (

≤•‚

) to check the last number

before you dial it.

Blocking Saved Number Redial

Saved Number Redial can be restricted at individual
telephones.

1. Place the programming template over the appropriate

buttons of the programming telephone.

2. Press

≤••¤ﬂﬂ‹››

3. Press

¤‹ﬂ›ﬂ

(the default System Coordinator

password).

4. Press

≠

and enter the internal number of the

telephone you want to program.

Tip -

You can copy a number onto an autodial button using

Saved Number Redial.

Summary of Contents for 7316







































































































































































































































































































Search results

Summary of Contents for 7316

Reviews:

Brands by name

Popular brands

Norstar 7316, System Manual

Search results

Summary of Contents for 7316

Reviews:

Brands by name

Popular brands