Norstar 7316 System Manual Download

Page: 189 / 294

Programming the alarm feature /

189

N0000626 03

Modular ICS 7.0 System Coordinator Guide

5. Press

to exit.

Using the alarm

To set an alarm on a digital telephone:

1. Press

≤°‡ﬁ.

The displays shows

Alrm:07:00

OFF

2. Do one of the following:

If the alarm is correct, press

ON/OFF

.The set displays:

Alrm:07:00am ON

. Press

DONE

to exit.

If you need to change the alarm time, press

CHG

. The set

displays:

Enter time:

3. To enter a new time, do one of the following:

If the clock uses a 24-hour format, enter an hour between
00 and 23, and minutes between 00 and 59. The set
displays:

Alarm ON hh:mm

If the clock uses a 12-hour format, enter the time, then
when the set displays:

hh:mm AM or PM?

, press

The set displays:

Alarm ON hh:mm

To set an alarm on an analog set:

1. Press

•°‡ﬁ

. A tone sounds.

2. Enter a four-digit alarm time:

If the clock uses a 24-hour format, enter an hour between
00 and 23, and minutes between 00 and 59. A tone sounds.
If the clock uses a 12-hour format, enter the time, then
press

•

to select am or

to select pm. A tone sounds.

To enter a new time, repeat the above steps and enter a new
time. This overwrites the existing entry.

Summary of Contents for 7316







































































































































































































































































































Search results

Summary of Contents for 7316

Reviews:

Related manuals for 7316

Brands by name

Popular brands

Norstar 7316, System Manual

Search results

Summary of Contents for 7316

Reviews:

Related manuals for 7316

Brands by name

Popular brands