Norstar 7316, System Manual

Page: 75 / 294

N0000626 03 Modular ICS 7.0 System Coordinator Guide
Making calls
There are many ways to make a call, depending on the
programming and the type of call, as follows:
• Pick up the receiver and dial. The Norstar system supports
three methods of dialing. See
Changing how you dial your
calls on page 80.
• Pick up the receiver, press a line button, and dial (if the call
is not on your prime line).
• Press the handsfree button and dial to talk without using
the receiver. See
Using handsfree and mute on page 66.
• Press the handsfree button, then press a line button, and
dial to talk without the receiver if the call is not on your
prime line.
• Press a line button and dial to talk without the receiver if
handsfree answerback is assigned to your telephone.
• Use one of the features that make dialing easier. See Time
savers for making calls on page 87.
Displays
The telephone you have called has no
internal lines available. Press
LATER
to use
the Ring Again or Message features or press
PRIORITY
to make a priority call.
You are dialing using Pre-dial. To erase an
incorrect digit, press the left end of
√
or
BKSP
. When the number is
complete, select a line or lift the receiver.
This prompt remains on your display as long
as you are on a call you have dialed. To
transfer the call, press
TRANSFER
.
221 busy
PRIORITY LATER
9__
QUIT BKSP
95551234
TRANSFER