Norstar 7316, System Manual

Page: 117 / 294

Line Redirection / 117
N0000626 03 Modular ICS 7.0 System Coordinator Guide
Turning on Line Redirection
Follow these steps to turn on Line Redirection:
1. Press
≤°›
.
2. Select the outgoing line to be used for redirected calls.
3. Enter the number to which calls are redirected.
Refer to the list below for suggestions.
4. Select the lines to be redirected.
In step 3, you can enter the telephone number to which you
want to redirect calls, using one of the following methods:
• Press an external autodial button.
• Enter an external telephone number (using no more than
24 digits) then press
≥
or
OK
.
• Press
≥
or
OK
if the line you have chosen as the
outgoing line is a private network line that does not require
you to dial digits.
If you use
ALL
to redirect all your lines, it is important that you
wait until all the lines on your telephone light up before
pressing
≥
or
OK.
If you press
≥
or
OK
before all the lines
light up, those lines not lit are not redirected.
Tip -
The line chosen for redirecting calls on other lines can be
used normally when it is not busy on a redirected call. To avoid
redirection failing because the chosen line is in use, choose a
line pool with several lines in it.