Norstar 7316, System Manual

Page: 259 / 294

Glossary / 259
N0000626 03 Modular ICS 7.0 System Coordinator Guide
digital phones, and analog telephones
connect to Analog Terminal Adapters or
analog station modules.
external line:
A line on your system
telephone used for making calls to
destinations outside the Norstar system.
external music source:
See Music
source.
external paging:
A feature you can
use to make voice announcements over
an externally-mounted loudspeaker
connected to the ICS. The external
speaker is not a Norstar component and
must be supplied by the customer.
F
feature button:
Many Norstar
features are invoked by pressing the
Feature (
≤
) button followed by a
feature code. The feature button is also
used to exit a feature.
feature code:
A number that is used
to activate a particular feature.
Feature programming:
≤•‹
Allows you to program a feature code
onto a memory button.
Forward:
See Call Forward.
Full Autohold (on idle line):
When
this feature is on, if you select an
available line and then do something
that selects another line, the first line is
put on hold.
Full Autohold
is enabled
under
Trunk/Line
data in
Lines
programming.
Full handsfree:
See handsfree.
G
Group Listening:
≤°‚¤
A feature that allows you to have others
in your office hear a caller through your
telephone speaker. The caller hears you
only when you speak into the receiver.
They cannot hear other people in the
office.
You can cancel Group Listen for the
current call. Group Listen is cancelled
automatically when you hang up the
Group Listen call.
H
Handsfree:
A feature you can use to make calls
without using the telephone receiver.
Full Handsfree
is activated under
Capabilities
in
Terminals&Sets
programming. When it is activated, a
handsfree button is automatically
assigned to the telephone.
Handsfree (HF) Answerback:
When activated, this feature
automatically turns on the microphone
at a telephone receiving a Voice Call so
that the person receiving the call can
respond without lifting the receiver. It is
activated under
Capabilities
in
Terminals&Sets
programming.
Handsfree/Mute button:
See
handsfree.
Hardware:
A section in programming
that shows what equipment has been
installed in the ICS. This section is
accessed by the installer.
headset:
A head-mounted or
ear-mounted telephone receiver that is
used instead of the hand-held receiver.
Headsets are not Norstar components
and must be supplied by the customer.
Held (Line) Reminder:
A system
telephone rings and displays the
message
On hold: LINENAM
when an
external call has been placed on hold for
a certain period of time. The
Held Line
Reminder
feature and
Remind delay
are set under
Feature settings
in
Sys
prgrmmng
.
HF Answerback:
See handsfree
answerback.