manualshive.com logo in svg

Norstar 7316, System Manual

Share
Download
Norstar 7316 System Manual Download Page 131

Viewing your messages / 

131

N0000626  03

Modular ICS 7.0 System Coordinator Guide

Removing items from your message list

You can erase a message while you are viewing it in your 
message list. If the message is from your voice message center, 
this only erases the message notification at your telephone. 
You need to erase the voice message at your voice message 
center. Refer to your voice message center documentation.

On a telephone with a one-line display

•

Press 

≥

.

On a telephone with a two-line display

Press

 ERASE

.

Removing items from your message list using an 
analog telephone connected to an ASM

To remove both internal and external messages on an analog 
telephone connected to an Analog Station Module

•

Press 

˚

£flfi

 to invoke the Cancel Message 

Waiting feature.

On analog telephones connected to an ASM, the Cancel 
Message Waiting feature cancels the oldest message received. 
The system no longer provides either a Stuttered Dial Tone or 
a Message Waiting Lamp if there are no messages pending.

Tip - 

If the designated direct-dial telephone of an analog 

telephone connected to an Analog Station Module (ASM) is 
changed, messages sent by the previous designated direct-dial 
telephone are kept in the incoming message list of the analog 
telephone until they are retrieved.

Summary of Contents for 7316







































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands