Norstar 7316 System Manual Download Page 147

Page: 147 / 294

Programming a feature code onto a memory button /

147

N0000626 03

Modular ICS 7.0 System Coordinator Guide

Programming a feature code onto a
memory button

You can program a feature code onto a memory button. In
some cases, pressing the button a second time cancels the
feature.

Programming feature buttons

Any memory button not programmed as an external or internal
line, target line, Answer button, or handsfree/mute button, is
available for features.

1. Press

≤•‹

2. Press the memory button you want to program with a

feature.

3. Enter the appropriate feature code you want to assign onto

the button.

The following feature codes cannot be programmed onto a
memory button: Long Tones and any code beginning with

•

except

≤•ﬁ‚⁄

(Language Choice) and

≤•‡

(Contrast Adjustment).

Erasing a feature button

1. Press

≤•⁄

2. Press the feature button.
3. Press

≥

to erase the button.

Tip -

When you program a button with the line pool feature

code, you must enter a line pool access code after the feature
code. The programmed line pool button accesses a specific line
pool, not the line pool feature.

Summary of Contents for 7316







































































































































































































































































































Search results

Summary of Contents for 7316

Reviews:

Brands by name

Popular brands

Norstar 7316, System Manual

Search results

Summary of Contents for 7316

Reviews:

Brands by name

Popular brands