Norstar 7316 Page 247 System Manual Download

Page: 247 / 294

Testing the telephone /

247

N0000626 03

Modular ICS 7.0 System Coordinator Guide

should be completely lit. You lose any information that was
showing on the display before the test started.

Pressing any button ends the test.

Testing the telephone buttons

1. Press

≤°‚ﬁ

, then

2. Press

TEST

≥

to go ahead with a button test.

3. Press the button to see its function. If the button you

pressed uses an indicator, it turns on when you test the
button.

4. Pressing the

button puts

Rls button

on the display

briefly and returns you to the

Button test

display.

Testing the speaker in the telephone handset

The handset test is not available if you have a headset plugged
into the telephone.

1. Press

≤°‚ﬁ

, then

twice. The display

reads

Handset test

2. Press

TEST

≥

to go ahead with a handset test.

3. Pick up the handset and listen. Dial tone sounds through

the handset at maximum volume. The volume is reset to
maximum only while the test is going on.

4. Pressing any button or hanging up ends the test.

Summary of Contents for 7316







































































































































































































































































































Search results

Summary of Contents for 7316

Reviews:

Related manuals for 7316

Brands by name

Popular brands

Norstar 7316, System Manual

Search results

Summary of Contents for 7316

Reviews:

Related manuals for 7316

Brands by name

Popular brands