manualshive.com logo in svg

Norstar 7316, System Manual

Share
Download
Norstar 7316 System Manual Download Page 206

206

 / Service provider features

Modular ICS 7.0 System Coordinator Guide

N0000626  03

MCID (profile 2)

The MCID feature allows you to enter 

≤°·‡

 to have 

call information recorded on the central office system for an 
incoming call on a specific line (ETSI EURO ISDN lines, 
only).

The user must invoke the feature code either during the active 
call or within 30 seconds (time varies on different networks) 
after the caller hangs up, but before the user hangs up.

Note: The Digital Mobility phone does not support this 
feature.

MCID prompts

The MCID request was accepted by the 
network.

No response to the MCID request.

MCID can only be invoked on received 
calls.

The caller information is not available. The 
CO is not able to log the information or it is 
not an ETSI BRI/PRI type of call.

MCID feature is not subscribed to.

MCID is not allowed in the current state of 
the call.

Invalid interaction with another 
supplementary service.

Call traced

No response

Not incoming

Not available

Not subscribed

Invalid state

Not allowed

Summary of Contents for 7316







































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands